| MODEL |
Max. output torque (kN·m) |
Max. working pressure (Mpa) |
Max. speed (rpm) |
Max. flow rate (L/min.) |
Typical applications |
|---|---|---|---|---|---|
| MAG-12V-120E | 1.18 | 20.6 | 80 | 20 | Mini excavator |
| MAG-18V-230F | 2.26 | 24.5 | 70 | 30 | Mini excavator |
| MAG-18V- 35OF | 3.43 | 27.5 | 60 | 40 | Mini excavator |
| MAG-26V-400F | 3.92 | 27.5 | 60 | 50 | Mini excavator |
| MAG-33V-650F | 6.37 | 27.5 | 60 | 60 | Mini excavator |
| MAG-50VP-800 | 7.84 | 29.4 | 55 | 80 | Midi excavator |
| MAG-85VP-1800E | 17.7 | 34.3 | 55 | 150 | Excavator |
| MAG-85VP-2400E | 23.5 | 34.3 | 50 | 150 | Excavator |
| MAG-170VP-3800G | 37.3 | 34.3 | 50 | 270 | Excavator |
| MAG-230VP-6000 | 58.8 | 34.3 | 50 | 320 | Excavator |
| MODEL | ∅D1 | ∅D2 | ∅D3 | ∅D4 | L1 | L2 | L3 | L4 | L5 | A | B | C | E | F | Main port | Drain port | Pilot port | w | X | ∅Y | ∅Z |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MAG-12V-120E | 179 | 140 | 140 | 177 | 205 | 95 | 45 | 50 | 51 | 43 | 16.5 | 39 | 37 | 54.5 |
G1/4 (PF1/4) |
G1/4 (PF1/4) |
G1/4 (PF1/4) |
8-M10 | 8-M10 | 155 | 155 |
|
MAG-18V-230F (W/A.C.V) |
190 | 150 | 160 | 200 | 250 | 104 | 40 | 59 | 61 | 46.5 | 19.5 | 40 | 37 | 58 |
G3/8 (PF3/8) |
G1/4 (PF1/4) |
G1/4 (PF1/4) |
13-M10 | 12-M10 | 170 | 180 |
|
MAG-18V-350F (W/A.C.V) |
215 | 165 | 190 | 238 | 263 | 115 | 50 | 48 | 41.5 | 54 | 22 | 45 | 41 | 71 |
G1/2 (PF1/2) |
G1/4 (PF1/4) |
G1/4 (PF1/4) |
11-M12 | 11-M12 | 192 | 215 |
|
MAG-26V-400F (W/A.C.V) |
215 | 165 | 204 | 255 | 288 | 120 | 70 | 46 | 41.5 | 54 | 22 | 45 | 41 | 71 |
G1/2 (PF1/2) |
G3/8 (PF3/8) |
G1/4 (PF1/4) |
9-M12 | 11-M12 | 192 | 232 |
|
MAG-33V-650F (W/A.C.V) |
264 | 200 | 230 | 286 | 296 | 128 | 68 | 50 | 43.5 | 54 | 22 | 45 | 41 | 71 |
G1/2 (PF1/2) |
G3/8 (PF3/8) |
G1/4 (PF1/4) |
12-M14 | 12-M14 | 240 | 262 |
|
MAG-50Vp-800 (W/R.V) |
284 | 210 | 265 | 332 | 354 | 145 | 80 | 70 | 64 | 58 | 23 | 50 | 48 | 71 |
GU2 (PF1/2) |
G3/8 (PF3/8) |
G1/4 (PF1/4) |
12-M16 | 12-M14 | 250 | 300 |
| MAG-85VP-1800E | 350 | 290 | 324 | 394 | 387 | 180 | 83 | 89 | 107 | 71 | 28 | 84 | 108 | - |
G3/4 (PF3/4) |
G1/2 (PF1/2) |
G1/4 (PFV4) |
16-M16 | 15-M15 | 320 | 364 |
| MAG-85VP-2400E | 400 | 330 | 365 | 437 | 713 | 200 | 100 | 75 | 93 | 71 | 28 | 84 | 108 | - |
G3/4 (PF3/4) |
G1/2 (PF1/2) |
G1/4 (PF1/4) |
16-M16 | 22-M16 | 370 | 405 |
| MAG-170VP-3800G | 370 | 300 | 402 | 469 | 526 | 254 | 99 | 128 | 131 | - | 54 | 95 | 110 | - |
G1 (PF1) |
G1/2 (PF1/2) |
G1/4 (PF1/4) |
30-M16 | 22-M16 | 340 | 440 |
| MAG-230VP-6000 | 462 | 380 | 450 | 530 | 613 | 313 | 112 | 157 | 171 | 87 | 37 | 89 | 113 | - |
G1 (PF1) |
G1/2 (PF1/2) |
G1/4 (PF1/4) |
20-M24 | 24-M20 | 425 | 495 |
| Model |
Displacement (cm³/rev) |
Max/ working pressure (Mpa) |
Max. speed (rpm) |
Control device control (N·m) |
|---|---|---|---|---|
| PSVD2-17E | 16.8⨉2 | 24 | 2,550 | Horsepower control |
| PSVD221E | 20.8⨉2 | 24 | 2400 | |
| PSVD2-27E | 26.9⨉2 | 24 | 2400 | |
| PSVD2-42 | 42.3⨉2 | 32 | 2200 |
The direction of rotation of the input shaft is to be set in one direction.
Please specify either “CW” or “CCW” as the direction of rotation.
| Model |
Displacement (cm³/rev) |
Max/ working pressure (Mpa) |
Max. speed (rpm) |
Control device control (N·m) |
|---|---|---|---|---|
| PSVL-42 | 42 | 24.5 | 2500 | Hosrpose Control, Load-sensing control |
| PSVL-42 | 64 | 24.5 | 2400 | |
| PSVL-84 | 84.6 | 32 | 2200 |
Only CW is available (clockwise when viewing from the input shaft side).
| Model |
Displacement (cm³/rev) |
Max/ working pressure (Mpa) |
Max. speed (rpm) |
Typical Input horsepower (kw) |
|---|---|---|---|---|
| PSV-10 | 10.0 | 27.5 | 3600 | 8 |
| PSV-16 | 16.4 | 27.5 | 3600 | 13.2 |
| PSV2-10 | 10.0⨉2 | 27.5 | 3200 | 7⨉2 |
| PSV2-16 | 16.4⨉2 | 27.5 | 3200 | 11.7⨉2 |
| PSVH2-28 | 28.1⨉2 | 34.3 | 3000 | 23.⨉2 |
Load sensing type variable displacement pump
Use together with a load-sensing (LS) valve. (See Page 49.)
Only CW type is available (clockwise when viewing from the input shaft side).
